poly-pad ? 1000 is a fberglass-reinforced insulator coated with a flled polyester resin. the material offers superior thermal resistance for high performance applications. polyester-based, thermally conductive insulators from bergquist provide a complete family of materials for silicone-sensitive applications. poly-pads are ideally suited for applications requiring conformal coatings or applications where silicone contamination is a concern (telecomm and certain aerospace applications). poly-pads are constructed with ceramic-flled polyester resins coating either side of a fberglass carrier or a flm carrier. the poly-pad ? family offers a complete range of performance characteristics to match individual applications. note: to build a part number, visit our website at www.bergquistcompany.com. poly-pad ? 1000 typical applications include ? power supplies ? automotive electronics ? motor controls ? power semiconductors configurations available ? sheet form, die-cut parts and roll form ? with or without pressure sensitive adhesive pds_pp_1000_january 2015 features and benefits ? thermal impedance: 0.82c-in 2 /w (@50 psi) ? polyester based ? for applications requiring non-silicone conformal coatings ? designed for silicone-sensitive applications equiring high performance product description polyester-based, thermally conductive insulation material january 2015 property imperial value metric value test method color yellow yellow visual reinforcement carrier fiberglass fiberglass ? thickness (inch) / (mm) 0.009 0.229 astm d374 hardness (shore a) 90 90 astm d2240 breaking strength (lbs/inch) / (kn/m) 100 18 astm d1458 elongation (%) 10 10 astm d412 tensile strength (psi) / (mpa) 7000 48 astm d412 continuous use temp (f) / (c) -4 to 302 -20 to 150 ? electrical dielectric breakdown voltage (vac) 2500 2500 astm d149 dielectric constant (1000 hz) 4.5 4.5 astm d150 volume resistivity (ohm-meter) 10 11 10 11 astm d257 thermal thermal conductivity (w/m-k) 1.2 1.2 astm d5470 thermal performance vs pressure pressure (psi) 10 25 50 100 200 to-220 thermal performance (c/w) 4.70 4.25 3.74 3.27 2.89 thermal impedance (c-in 2 /w) (1) 1.30 1.02 0.82 0.61 0.43 1) the astm d5470 test fixture was used. the recorded value includes interfacial thermal resistance. these values are provided for reference only. actual application performance is directly related to the surface roughness, flatness and pressure applied. typical properties of poly-pad 1 000
for the most direct access to local sales and technical support visit: www.bergquistcompany.com americas +1.800.347.4572 europe +31.35.5380684 asia +852.2690.9296 tds poly-pad ? 1000, january 2015 disclaimer note: the information provided in this technical data sheet (tds) including the recommendations for use and application of the product are based on our k n o w l e d g e a n d e x p e r i e n c e o f t h e p r o d u c t a s a t t h e d a t e o f t h i s t d s . t h e p r o d u c t can have a variety of different applications as well as differing application and working conditions in your environment that are beyond our control. henkel is, t h e r e f o r e , n o t l i a b l e f o r t h e s u i t a b i l i t y o f o u r p r o d u c t f o r t h e p r o d u c t i o n p r o c e s s e s and conditions in respect of which you use them, as well as the intended applications and results. we strongly recommend that you carry out your own prior trials to confrm such suitability of our product. a n y l i a b i l i t y i n r e s p e c t o f t h e i n f o r m a t i o n i n t h e te c h n i c a l d a t a s h e e t o r a n y o t h e r w r i t t e n o r o r a l r e c o m m e n d a t i o n ( s ) r e g a r d i n g t h e c o n c e r n e d p r o d u c t i s e x c l u d e d , except if other wise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. i n case products are delivered by henkel belgium nv, henkel electronic materials nv, henkel nederland bv, henkel technologies france sas and henkel france sa please additionally note the following: in case henkel would be nevertheless held liable, on whatever legal ground, henkels liability will in no event exceed the amount of the concerned delivery. in case products are delivered by henkel colombiana, s.a.s. the following disclaimer is applicable: the information provided in this technical data sheet (tds) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of this tds. henkel is, t h e r e f o r e , n o t l i a b l e f o r t h e s u i t a b i l i t y o f o u r p r o d u c t f o r t h e p r o d u c t i o n p r o c e s s e s and conditions in respect of which you use them, as well as the intended applications and results. we strongly recommend that you carry out your own prior trials to confrm such suitability of our product. a n y l i a b i l i t y i n r e s p e c t o f t h e i n f o r m a t i o n i n t h e te c h n i c a l d a t a s h e e t o r a n y o t h e r w r i t t e n o r o r a l r e c o m m e n d a t i o n ( s ) r e g a r d i n g t h e c o n c e r n e d p r o d u c t i s e x c l u d e d , except if other wise explicitly agreed and except in relation to death or personal injury caused by our negligence and any liability under any applicable mandatory product liability law. in case products are delivered by henkel corporation, resin technology group, inc., or henkel canada corporation, the following disclaimer is applicable: the data contained herein are furnished for information only and are believed to be reliable. we cannot assume responsibility for the results obtained by others over whose methods we have no control. it is the users responsibility to d e t e r m i n e s u i t a b i l i t y f o r t h e u s e r s p u r p o s e o f a n y p r o d u c t i o n m e t h o d s m e n t i o n e d herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. in light of the foregoing, henkel corporation specifcally disclaims all warranties expressed or implied, including warranties of m e r c h a n t a b i l i t y o r f t n e s s f o r a p a r t i c u l a r p u r p o s e , a r i s i n g f r o m s a l e o r u s e of henkel corporations products. henkel corporation specifcally disclaims any liability for consequential or incidental damages of any kind, including lost profts. the discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any henkel corporation patents that may cover such processes or compositions. we recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. this product may be covered by one or more united states or foreign patents or patent applications. trademark usage except as otherwise noted, all trademarks in this document are trademarks of henkel corporation in the u.s. and elsewhere. ? denotes a trademark registered in the u.s. patent and trademark offce reference 0.1
|
